Compare excavator screening buckets by carrier fit, mounting, hydraulics and screening system. Check the target fraction, material, attachment weight, included equipment and working-part condition.
None of the advertisements match the required criteria.
No offer found in the “Excavator screening buckets” category?
Describe what you need, your timing and key requirements. After email confirmation and moderation, the request may reach verified companies.
2 short steps. Clicking the button does not publish anything.
Ask for an offer in “Excavator screening buckets”Describe your requirements in a separate request. Verified companies may respond after email confirmation and moderation.
Describe what you need
Confirm your email to complete your request
Your request is saved, but companies cannot see it yet.
Open the message from Motendo and click the request confirmation button.
After confirmation, we will review the content before publishing it.
Cannot find the message? Check Spam or Promotions.
Per page
How to choose an excavator screening bucket
Start with the material to be separated and the required result. This category can include rotary-basket buckets and attachments that use shafts, drums or screening stars. These systems are not interchangeable in every application: the working mechanism and available configurations affect how material is handled. A useful listing should identify the exact attachment version and the component that determines the screened fraction or separation method.
Specifications to compare
Carrier compatibility: confirm the exact excavator model and configuration, recommended carrier class, service weight, capacity and mounting interface. An adapter plate and quick coupler can change the weight and geometry of the complete setup.
Hydraulic requirements: compare required oil pressure and flow, circuit direction or two-way operation, and any case-drain requirement with the carrier. Requirements are model-specific and should not be inferred from a similar attachment.
Screened fraction: identify the basket, mesh, panels, shafts, blades or stars and the available sizes or configurations. A nominal opening alone does not guarantee the same result with every material.
Material and operation: state whether the feed is soil, sand, aggregate, demolition material, compost or another material, together with moisture, contamination and maximum lump size. Compare output figures only with the material and test conditions to which they apply.
Included equipment: check the adapter, hoses, couplings, additional baskets or screening modules, guards and documentation. Missing connection or working parts can change commissioning cost.
What to inspect on a used attachment
Ask for the identification plate, model and serial number, operating manual and hydraulic data. Inspect the body, welds and mounting, followed by the basket, mesh, panels, shafts, stars or blades used by the particular design. Check play, bearings, transmission, hydraulic motor, hoses, couplings and leakage. Ask which working parts have been replaced, how the unit was lubricated and whether repairs were carried out. Wear limits and service intervals must be confirmed in the documentation for the exact model.
Buyer FAQ
Can every screening bucket process the same material?
No. The working system, available fraction, hydraulic requirements and manufacturer guidance can limit the application. Dry, wet, sticky or lumpy feed may behave differently in different attachment designs.
Is excavator weight enough to confirm compatibility?
No. Attachment weight and geometry, mounting, quick-coupler fit, required pressure and flow, circuit type and any case-drain requirement must also be checked.
What information should a listing include?
Useful details include make, model and serial number, screening-system type, compatible carriers, mounting, weight, capacity, hydraulic requirements, working-element type and configuration, included equipment, documentation and wear photographs.
Log in with Facebook
Log in with Google
