Compare concrete mixing buckets by carrier, mounting, loaded weight, working capacity and hydraulics. Check the mixing system, discharge method, included equipment and wear condition.
None of the advertisements match the required criteria.
No offer found in the “Concrete mixing buckets” category?
Describe what you need, your timing and key requirements. After email confirmation and moderation, the request may reach verified companies.
2 short steps. Clicking the button does not publish anything.
Ask for an offer in “Concrete mixing buckets”Describe your requirements in a separate request. Verified companies may respond after email confirmation and moderation.
Describe what you need
Confirm your email to complete your request
Your request is saved, but companies cannot see it yet.
Open the message from Motendo and click the request confirmation button.
After confirmation, we will review the content before publishing it.
Cannot find the message? Check Spam or Promotions.
Per page
How to choose a concrete mixing bucket
This category covers attachments mounted on an excavator or another compatible carrier, not standalone drum mixers. Before comparing listings, identify the exact attachment type, the materials approved by the manufacturer and the required batch size. Capacity must be considered together with the weight of the mix, the carrier limits and the specified loading and discharge method.
Specifications to compare
Carrier, mounting and weight: confirm the exact carrier model and configuration, adapter plate or quick-coupler interface, empty attachment weight and load with the maximum permitted batch. Check compatibility against the carrier and bucket documentation, including the reach and geometry of the complete setup.
Capacity and batch size: distinguish geometric volume, working capacity and stated batch output. A litre figure alone does not confirm the weight of the finished mix or output under particular conditions.
Hydraulics and controls: compare required oil pressure and flow, circuit direction, hoses and couplings, and any electrical or hydraulic kit used to control discharge. These requirements are model-specific.
Mixing system: identify the auger or paddle arrangement, rotation direction or bidirectional operation, hydraulic drive, transmission and approved applications. Do not assume that every model accepts the same mix composition or aggregate size.
Loading and discharge: check for a protective grate, bag splitter, bottom opening, discharge pipe or hose, and valve controls. Confirm which parts are included and the working method specified in the manufacturer's instructions.
What to inspect on a used mixing bucket
Ask for the identification plate, model and serial number, operating manual and hydraulic data. Inspect the body, floor, welds and mounting, followed by the auger or paddles, bearings, seals, gearbox, drive and discharge components. Check hoses, couplings, leakage, play, guards and controls. Ask about repairs, replaced wear parts and a functional test with a material permitted by the documentation. Wear limits and service requirements must be confirmed for the exact model.
Buyer FAQ
Is capacity alone enough to choose a mixing bucket?
No. Empty and loaded attachment weight, carrier limits, mounting, hydraulics, permitted batch size and discharge method must also be checked.
Does every mixing bucket fit an excavator?
No. Some models are also designed for skid-steer loaders, wheel loaders, telehandlers or backhoe loaders. Compatibility requires confirmation of the exact carrier, adapter, geometry, load and hydraulic specifications.
What information should a listing include?
Useful details include make, model and serial number, compatible carriers, mounting, empty and loaded weight, working capacity or batch size, oil pressure and flow, mixing system, discharge method, included equipment, documentation and wear photographs.
Log in with Facebook
Log in with Google
